Dot Standard Mobile Fuel Trailers Mirror Surface Aluminum Alloy
Tank Body
Description:
• Lightweight Design
Aluminum alloy fuel trailers are designed with aluminum alloy which
has the characteristics like light weight, good electrical
conductivity, strong corrosion resistance, and easy processing. The
total tare weight of aluminum alloy fuel tank trailer is 1/3 less
than the carbon steel fuel tank trailer based on the same
specification. Normally the aluminum alloy tank does not need to be
coated on the surface, which already shows good gloss on surface.
• Tank Parts
This aluminum fuel tank trailer adopts the American brand
OPW/CIVOCAN tank parts, which is one of the top suppliers in the
tank parts area. The tank parts mainly includes the manhole cover,
bottom valve, standard API discharge valve, oil gas recovery valve,
gas vent valve, anti-flow optical sensor, control board for bottom
valve, emergency cut bottom, etc.
The top quality whole set of tank parts ensure the fluent and easy
operation of the fuel tank. All these tank parts are made by
aluminum alloy.
• DOT Standard
This tank is designed and made according to DOT standard which
ensures high safety level.
Advantages:
• Good Quality
Our company is committed to the development and research of
aluminum alloy fuel tanks. Our technical staff have rich experience
on production, so our products are produced with advanced
technology and reliable quality.
• Static-free
Aluminum alloy has good electrical conductivity. Thus, static
electricity is not easy to happen. Sparks are not generated when
vehicles collide.
• Neat and Beautiful Surface
The mirror surface looks beautiful and neat. Smooth surface is free
from dust, easy to clean and do not need to spray paint.
• Long Service Life
There is a dense oxide film on the surface of aluminum alloy, which
is anti-corrosion. Additional anti-corrosion treatment is needless.
The service life is at least 10 years.
Specifications:
| Overall Size | 11800 x 2490 x 3800 mm |
| Capacity | 44 CBM |
| Compartment | Optional |
| Structure | 6 mm aluminum alloy 5454 in tank; 6 mm tank end plate; with walkway and pneumatic operation hand rail on the top of the
tank |
| Axle | 12 ton BPW brand, 3 units |
| Suspension | Air suspension, with lift device on front axle |
| King Pin | JOST 2", bolt on type |
| Landing Gear | JOST 28 ton, two speeds |
| Tire | Hankook 365/65R22.5, 6 units |
| Rim | Aluminum alloy, 11.75-22.5, 6 units |
| Braking System | Gladhand valve; Wabco relay valve; 30/30 double brake chambers on rear axle; 30 single chambers on other axles |
| Electrical System | Dual circuit, 7-way split pin receptacle plug, LED light |
| ABS | Wabco |
| Painting | Mirror surface around tank |
| Mudguard | Plastic or steel |
| Others | 1 tool box, 1 wheel carrier, excluding spare wheel |
| Selective Devices | One manhole each compartment; Europe or USA manhole and API valve; Vapor recovery equipment |
| Gallery |
 |
